Anthony Display Doors
Give your walk-in coolers a bright, efficient, high-style look with Anthony display doors. Style, eye appeal, and performance at a level the volume brands don't match — exactly the call when curb appeal and interior aesthetics drive the spec.
JayComp Development has specified and installed Anthony doors on 2,500+ projects over 24+ years. Call 877-843-0183 or request a quote to discuss the right Anthony series for your cooler footprint.
Quick Contact — we'll get back to you fast.
Why Anthony for Premium Cooler Projects
Anthony is the glass display door line we reach for when the project needs premium finish quality, cleanest sightlines to product, and long-term energy performance. For operators chasing shopper perception and efficiency payback, Anthony's reversible Model 101 and retrofit-friendly Eliminaator series are the workhorses.
Where Styleline wins on cost-per-door for high-volume standard c-store buildouts, see Styleline — Anthony earns the spec when the store is positioning upscale, remodeling a premium format, or the operator is retrofitting an existing Anthony cooler lineup door by door.
Need something more specialty? Displayrite (CDS) covers the middle ground.
What Anthony Delivers
- Premium finish and door rail options when curb appeal and interior aesthetics drive the spec
- The broadest retrofit compatibility of any glass door line we carry
- Energy performance that typically pays back retrofit cost in 2–4 years
- Long-established service parts availability
Anthony Door Series We Install
Model 101 Performance
Reversible cooler & freezer doors
- Sets a higher standard for performance and energy efficiency in reversible cooler and freezer doors
- Narrow door rail available for maximum product visibility
- Anti-condensate heaters that modulate with ambient humidity
- Energy-efficient tempered glass with low-E coating
Model 401 Economy
Cost-effective, easy-install package
- Easy-to-install packages complete with shelving, lights, and continuous frame lineups
- Produced to Anthony's high-quality standards
- Cost-effective option for budget-conscious walk-in cooler and freezer builds
- Available for both cooler and freezer applications
Eliminaator Series
Retrofit-friendly, high-efficiency
- Available in standard (ELM1) or curved (ELMC) door and frame rail versions
- Highly energy-efficient for walk-in cooler and freezer applications
- Retrofits to most existing Anthony door frames
- Eliminates glass heat — impressive energy savings and fast payback
- Ideal for operators replacing aging doors across an existing portfolio
The Retrofit Math
If you're running a walk-in cooler that's 10+ years old, the Eliminaator retrofit often pays back on energy savings alone. Old glass doors leak heat at the frame, run continuous anti-sweat heaters, and force the compressor into near-continuous operation.
Modern Anthony doors with modulated anti-condensate heating, low-E glass, and efficient frame design typically cut glass-door-attributable refrigeration load by 30–50% — enough that full retrofit cost recovers in 2–4 years of operation for most c-store applications.
Dig deeper in our walk-in cooler energy efficiency guide.
Anthony vs. Styleline vs. Displayrite: Which Door Is Right?
Anthony
Premium / retrofit-friendly
Spec Anthony when curb appeal, cleanest product sightlines, and long-term energy performance drive the project. Best retrofit compatibility — Eliminaator easily fits existing Anthony frame lineups. Upscale c-store remodels, premium grocery, specialty retail.
Styleline
High-volume standard
Spec Styleline for high-volume c-store buildouts where cost-per-door matters and the format is standard beverage cooler or beer cave. Best value at scale. Classic Plus and 20//20 Plus cover most c-store use cases at lower price points than Anthony.
Displayrite (CDS)
Specialty / mid-tier
Spec Displayrite when the application needs specialty sizes, specific temperature classes, or cost-competitive multi-cooler packages. Retrofit-compatible with existing Anthony and Styleline frames for partial door replacements.
What's Inside an Anthony Display Door
An Anthony glass display door isn't just a pane of glass in a frame. It's an engineered system that balances thermal performance, visual clarity, anti-condensation behavior, and mechanical durability across tens of thousands of open/close cycles per year.
- Tempered dual or triple-pane glass: Low-E coating, inert gas fill (argon or krypton) between panes for insulation
- Anti-condensate heaters: Modulating heaters in frame and mullion that ramp up only when ambient humidity demands — continuous-on designs waste energy
- LED-lit frame: Integrated LED strips illuminate product from the frame — minimal heat dump into the cooler, no bulb replacement cycles
- Heavy-duty hinge: Three-hinge design rated for 100,000+ cycles — standard c-store operation hits that in 3–5 years
- Torque-adjustable closer: Ensures doors close fully every time, even when customers let go mid-swing
- NSF and UL certification: Required for c-store food applications and fire code compliance
Door Sizing & Configurations
Anthony doors come in standard widths (typically 30", 36") and heights (usually 72"–84"), with custom configurations available for non-standard cooler footprints. Frame lineups run anywhere from 2 doors (small beverage cooler) to 24+ doors (large beer cave).
- Single-door: specialty cooler sections, 1–2 door applications
- Multi-door lineups: 4–12 doors across a standard c-store cold vault
- Beer cave: 12–24+ doors, heavy-duty hardware throughout
- Curved configurations: Eliminaator ELMC for rounded cooler faces
How We Install Anthony Doors
Installation happens as part of the broader walk-in cooler build or remodel. Our typical sequence:
- 1Measure and specWe measure the cooler opening, document existing frame conditions (if retrofit), and spec the exact Anthony series and hardware package.
- 2Order and lead timeAnthony doors have 4–8 week lead times typical. We order during permitting/construction so delivery aligns with cooler readiness.
- 3Cooler prepWalk-in cooler must be temperature-stable and structurally ready. Glass door openings inspected for squareness, door frames dry-fit.
- 4Frame installFrames installed with proper shim, anchor, and gasket sealing. Electrical rough-in for anti-condensate heaters and LED lighting completed.
- 5Door hang and calibrateDoors hung, hinges adjusted, closers torqued to spec, anti-sweat heaters tested.
- 6CommissioningTemperature recovery tested after repeated door opens. Anti-condensate heater duty cycling verified.
Integrated with the full walk-in cooler installation process — doors are one piece of a larger refrigeration system that includes panels, compressors, and evaporators.
Anthony Display Door FAQs
How much does an Anthony display door cost?
Anthony doors typically run $1,200–$2,500 per door for the door-and-frame package, depending on series (Model 101, 401 Economy, Eliminaator), glass configuration (dual vs. triple pane), and LED lighting integration. Multi-door lineup discounts apply. Installation labor runs an additional $200–$500 per door for standard retrofit work.
How long do Anthony glass doors last?
Properly installed and maintained Anthony doors last 15–20 years before major hardware service. Hinges, closers, and gasket seals may need attention at the 8–12 year mark. Glass itself is typically the last component to fail.
Can I retrofit Anthony doors into existing cooler frames?
Often yes — especially with the Eliminaator series, which is designed to retrofit into most existing Anthony frame rails. Styleline-to-Anthony retrofits are possible but typically require frame replacement. Always have us measure and spec before ordering.
Are Anthony doors energy-efficient?
Yes — modern Anthony doors use low-E tempered glass, inert gas fill between panes, and modulating anti-condensate heaters. Energy performance typically exceeds Title 24 and ASHRAE minimums. Retrofit ROI from replacing old doors typically runs 2–4 years on energy savings alone.
Does JayComp Development repair existing Anthony doors?
No — we specify, sell, and install Anthony doors as part of new-build and remodel projects. We do not offer stand-alone repair service for existing door installations. If your existing Anthony doors need repair, call a local commercial refrigeration service company.
How We Work on Glass Door Projects
JayComp Development specifies, sells, and installs Anthony display doors as part of new-build and remodel projects. We're not a stand-alone refrigeration repair shop — if that's what you need, call a local service company. If you're designing a new cooler lineup, replacing doors during a remodel, or retrofitting an aging Anthony installation, that's exactly where our 24+ years of commercial refrigeration experience lands.
Related: commercial refrigeration services, walk-in cooler installation, installation cost.
Get an Anthony Door Package Quote
Share cooler footprint, door count, and whether this is new build or retrofit. We'll come back with the Anthony series recommendation and package pricing. Call 877-843-0183 or use the form below.